Topwind swivel jack with 10" travel and weld-on tubular mount. Rated for 2,000 lb. lift capacity and includes a foot plate.
Cleans dirty injectors and prevents injector sticking in all engines, including High Pressure Common Rail (HPCR) systems. Boosts cetane up to 6 numbers so engines run smoother with less power lag and faster cold starts; Boosts power and reduces need for downshifting during high-load conditions. Improves fuel economy up to 8 percent - fuel savings exceed cost of additive; Stabilizes stored fuel. Effective in all diesel fuels, including Ultra Low Sulfur Diesel (ULSD), biodiesel and biodiesel blends.
Max. Capacity: 2,000 Lbs. Lift Travel: 10. Length Retracted: 17.0. Jack Type: Round Tube. Jack Tube Size (Outer): 2.25 . Jack Tube Size (Inner): 2.0. Crank Type: Top wind. Mount Type: Weld on tube mount, inside. Mount Height: 11.25. Ground Support: 7.6 x 3.8 Foot plate. Grease Fitting: Yes. Weight: 12.0 Lbs.
The most commonly replaced automotive fuses. Set includes 5 amps-10 pcs, 7.5amps-10pcs, 10amp-20pcs, 15amps-20pcs, 20amps-20pcs, 25amps- 10pcs, 30amps-10 pcs. 100 pc. set.
Thaws frozen door latches and removes road film. Harmless to auto paint, chrome and rubber parts. 11.5 oz.
Melts frost and ice on car windows, thaws frozen door latches, and frees ice encrusted wipers. Harmless to auto paint, chrome and rubber parts. 11.5 oz.
Provides complete cleaning of fuel system components to restore power, performance, & mpg.
HEET contains special additives and methanol. When HEET is added to the gas tank, it sinks to the bottom and mixes with any water. Since both HEET and water are heavier than gasoline, they go to the bottom of the gas tank. HEET absorbs water and keeps it from freezing, and blocking the flow of gasoline through the gas line and fuel pump. 12 oz.
Heet aids in quick cold weather starts while preventing frozen fuel lines. Removes water and condensation from fuel system. 12 oz.
No.1 selling brand of premium gas-line antifreeze. Absorbs 5 times more water than regular gas dryers. Removes water from fuel system. Prevents rust and corrosion.
Aramid fiber reinforcement. 4,500 psi working pressure and 12,000 psi minimum burst. 1/8" NPT male ends.
Helps slide outs to operate smoothly without sticking, protects against rust and corrosion. Repels dirt and grime.
Ease of cranking. Smooth operation and handling. Certified vertical and side load capacity. Proven reliability. Options for painted or plated inner and outer tubes.
5,000 lb. max. Ease of cranking. Smooth operation and handling. Certified vertical and side load capacity. Proven reliability. Options for painted or plated inner and outer tubes.