Hardware - Welding

1 Lb. 1/8" KT Industries Welding Rod 7014

This electrode is recommended for applications where higher deposition and speed of travel is important. 79,000 PSI tensile strength. 1/8" 90-140 operating Amps.

1 Lb. 3/32" KT Industries Welding Rod 6011

Designed for AC power sources, but can be used on DC+ or DC-. 82,000 PSI tensile strength. Operating Amps 3/32" 65-90 amps.

1 Lb. KT Industries 7018 Professional Welding Electrodes

Superior weld appeal. Use for a variety of steels including low, medium and high carbon steels, low alloy structures, and high carbon castings. Can be used in AC or DC+. 7018’s typical applications include pressure vessels, cold rolled steels and structural steels. 70,000 PSI tensile strength. Not recommended for low voltage AC welders. 3/32" 55-85 operating Amps.

1 Lb. KT Industries E6013 Professional Welding Electrode

This electrode has a very stable arc and good bead appearance when used with either AC or DC power sources. 62,000 to 79,500 PSI tensile strength. Smaller diameter rods may be used on thin metal such as auto bodies, ornamental iron, metal furniture, or any mild steel where appearance is important. 1/8" 80-130 operating Amps. 1 lb.

1/4" Female M-Style Air Coupler

Contains four zinc plated, solid brass couplers.

1/4" Male M-Style Air Nipple

Contains ten zinc plated, steel nipples. 10 pk.

1/8" KT Welding Rod 6013

This electrode has a very stable arc and good bead appearance when used with either AC or DC power sources. 62,000 to 79,500 PSI tensile strength. Smaller diameter rods may be used on thin metal such as auto bodies, ornamental iron, metal furniture, or any mild steel where appearance is important.

1/8" KT Welding Rod 7014

Typical applications include machine bases, frames and heavy sheet metal. Use for a variety of steels including low, medium and high carbon steels, free machining steels, low alloy structures, and high carbon castings. 79,000 PSI tensile strength. This electrode is frequently used for short, irregular, poorly fit or downhill joints with medium to low penetration.

1/8" KT Welding Rod 7018

Can be used in AC or DC+. 7018’s typical applications include pressure vessels, cold rolled steels and structural steels. 70,000 PSI tensile strength. Not recommended for low voltage AC welders.

10 Lb. KT Industries E6011 Professional Welding Electrodes

Can be used to weld through paint, dirt, mill scale or rust. 82,000 PSI tensile strength. This product has a strong arc force and rapid solidification of weld metal which allows vertical or overhead welding. 6011 is good for jobs that have poor fit up in the joints, rusty or oily metals. Operating Amps 3/32" 65-90 amps.

1000' 14-2NM WG Electric Wire

For exposed and concealed applications. For indoor use. For dry locations up to 90 degree C or 194 degrees F as specified in the NEC 1. Nylon jackets help significantly reduce pulling force resulting in easier installation. 1,000 ft. of cable.

14.1 Oz. Magna Propane Torch

Brass pencil tip burner. with a replaceable orifice. Adjustable flame knob for economy and control. Solid brass valve body for durability. Concentrated flame for pinpoint heating. Includes 14.1 oz disposable propane cylinder. Use with propane fuel only. 14.1 oz.

2 Lb. Mild Steel MIG Wire

MIG Welding Wire, ER70S6, Carbon Steel, Dia. (In.) 0.023, Container 2 lb. Spool, Min. Tensile Strength (PSI) 77,000, Mig Welding.

3/32" KT Industries Welding Rod 6013

This electrode has a very stable arc and good bead appearance when used with either AC or DC power sources. 62,000 to 79,500 PSI tensile strength. Smaller diameter rods may be used on thin metal such as auto bodies, ornamental iron, metal furniture, or any mild steel where appearance is important.

3/32" KT Welding Rod 7014

Typical applications include machine bases, frames and heavy sheet metal. Use for a variety of steels including low, medium and high carbon steels, free machining steels, low alloy structures, and high carbon castings. 79,000 PSI tensile strength. This electrode is frequently used for short, irregular, poorly fit or downhill joints with medium to low penetration.

3/32" KT Welding Rod 7018

Can be used in AC or DC+. 7018’s typical applications include pressure vessels, cold rolled steels and structural steels. 70,000 PSI tensile strength. Not recommended for low voltage AC welders.

3/32", 5 Lb. KT Industries Inc. 6011 Premium Welding Electrodes

Premium welding electrodes can be used to weld through paint, dirt, mill scale or rust. 82,000 PSI tensile strength. This product has a strong arc force and rapid solidification of weld metal which allows vertical or overhead welding. 6011 is good for jobs that have poor fit up in the joints, rusty or oily metals. Operating Amps 3/32" 65-90 amps.